Whether it comes to business or research, in the end it is the results that count.

Below you will find a list of publications in which MRI-STaR was involved and that were published independently.

 

Title
Author(s)
Paper / conference, year, DOI
Retrospective evaluation of the maximum MR image artifact size according to ASTM F2119 with respect to sequences and slice orientations relevant for MR compatibility testing T. Spronk, J. Kreutner, O. Kraff, H. H. Quick, G. Schaefers ISMRM 2019
MR Safety, RF Heating, Implants and MR Scanning Duration, MR Conditional Labeling and Total MR Examination Time – History and State of the Art H. Engels, G. Schaefers UKRCO 2018
Validation of numerical simulation of susceptibility artifact and the consequences for artifact size calculation of the current ASTM standard F2119 T. Spronk, A. Chinnaiyan, J. Kreutner, G. Schaefers ISMRM 2018
Comparison of electromagnetic and thermal simulations with measurements of different orthopedic implants system at 1.5T K.Wang, Z. Ihsan, J. Seehafer, T. Doering, W. Goertz, G. Schaefers ISMRM 2018
Numerical Simulation of Artifacts in Magnetic Resonance Imaging (MRI) due to Metallic Implants A. Chinnaiyan, J. Kreutner, G. Schaefers ESMRMB 2017
Thermographic evaluation of different media types for hot spot detection during a simulated switched MRI gradient magnetic field exposure M. Wolff, S. Scholz, A. Douiri, W. Görtz, G. Schaefers ESMRMB 2017
Investigation of RF-induced heating of wrist implants M. Kozlov, G. Schaefers ISMRM 2017
Coil losses significantly alter the electromagnetic fields of a 64 MHz quadrature driven birdcage coil M. Kozlov, L. M. Angelone (FDA), W. Kainz (FDA) ISMRM 2017
Sensitivity of the transfer function on the dielectric properties of the surrounding media: a case study M. Kozlov, W. Kainz (FDA) ISMRM 2017
Characterization of gradient-induced vibration: Can optical displacement sensors be replaced by miniature accelerometers? A. Douiri, S. Scholz, W. Görtz, J. Kreutner, G. Schaefers ISMRM 2017
A review of MR labeling information related to IEC 62570 standardized ‚MR Safe’ and ‘MR Conditional’ labeling requirements of commercially available MRI accessories G.M. Stateczny, G. Schaefers UKRC 2017
A review of MR labeling information related to IEC 62570 standardized ‚MR Safe’ and ‘MR Conditional’ labeling requirements of commercially available MRI accessories G.M. Stateczny, G. Schaefers SMRT 2017
Influence of electrical properties of lead insulation on radio frequency induced power deposition during magnetic resonance imaging at 64 MHz M. Kozlov, G. Schaefers BioMed 2016, DOI: 10.2316/P.2016.832-023
Influence of the Second Lead on Radio Frequency Induced Power Deposition at 64 and 127 MHz M. Kozlov, G. Schaefers IEEE-CAMA 2016
Influence of Lead Wire Diameter on Radio Frequency Induced Power Deposition at 64 and 127 MHz M. Kozlov, G. Schaefers IEEE-CAMA 2016
All-in-one test phantom for assessment of essential magnetic resonance (MR) image quality parameters according to IEC 62464-1 W. Görtz, D. Schalla, J. Kreutner, G. Schaefers ESMRMB 2016
Gradient-induced charge and rectified current measurement of a multi-electrode active implantable medical device (AIMD) according to ISO/TS 10974 Clause 16 S. Scholz, W. Görtz, A. Douiri, G. Schaefers ESMRMB 2016
Hot Spot Survey and 3D power distribution of an electronic catheter during a RF-field exposure using fiberoptic temperature sensors S. Scholz, G. Schaefers, A. Douiri, W. Görtz ESMRMB 2016
Evaluation of clinical MRI scanner capabilities to perform ISO/TS 10974 ‘Sequence of Sequences’ for Combined Field Testing for active implantable medical devices (AIMD) J. Kreutner, J. Van Den Brink, M. Scholten, P. Sanders, G. Schaefers ESMRMB 2016
Variation of Radio Frequency Induced Power Deposition due to Second Surrounding Tissue M. Kozlov, G. Schaefers IEEE EMBC 2016
Radio frequency induced heating of an insulated wire during magnetic resonance imaging M. Kozlov, G. Schaefers IEEE EMBC 2016
A review of labeling information of commercially available MRI accessories related to IEC 62570 standardized ‚MR Safe`and `MR Conditional`labelling requirements G.M. Stateczny, G. Schaefers SMIT 2016
Performing ISO/TS 10974 ‘Sequence of Sequences’ for Combined Field Testing for active implantable medical devices on a clinical scanner J. S. van den Brink, N. Fülle, J. Kreutner, P.Sanders, G. Schaefers SMIT 2016
An Evaluation of Radio Frequency Induced Power Deposition of insuated leads with an lead model M. Kozlov, G. Schaefers IEEE URSI-APS 2016
Influence of the second surrounding tissue on radio frequency induced power depostion M. Kozlov, G. Schaefers IEEE URSI-APS 2016
Influence of low permittivity medium conductivity on radio frequency induced power deposition M. Kozlov, G. Schaefers IEEE URSI-APS 2016
Assessment of Radio Frequency Induced Heating On or Near Implants during MRI – some open issues M. Kozlov, G. Schaefers ISMRM 2016
Robust Simulation of MRI Gradient Field-Induced Vibration of an Implantable Medical Device I. Zainul, M. Abbasi, G. Schaefers ISMRM 2016
Influence of electrical properties of lead insulation on radio frequency induced heating during MRI M. Kozlov, G. Schaefers ISMRM 2016
An Evaluation of Radio Frequency Induced Power Deposition of Coaxial Leads with an Implant Model M. Kozlov, G. Schaefers ISMRM 2016
Uncertainty of RF Induced Heating Tests of a Generic Orthopedic Implant In Different Phantoms M. Abbasi, Y. Noureddine, G. Schaefers, D. Erni ISMRM 2016
Passive 3-D Needle Tip Tracking in Freehand MR-guided Interventions with Needle Model Visualization S. Schmitt, C. Sobotta, M. Choli, H. M. Overhoff Bildverarbeitung fuer die Medizin (Buchkapitel) 2015
Investigation of MRI Switched Gradient Magnetic Field-Induced Heating of a Heart Valve Implant at 2.5 kHz M. Abbasi, Z. Ihsan, A. Douri, G. Schaefers, D. Erni ESMRMB 2015
Evaluation of RF heating surrounding a heart valve implant at 64 MHz (1.5 T MRI system) M. Abbasi, Z. Ihsan, N. Fuelle, G. Schaefers, D. Erni ESMRMB 2015
Analysis of temperature rise generated by a titanium implant inside 1.5T MRI RF whole body coil M. Kozlov, G. Schaefers IEEE APS 2015, DOI:10.1109/APS.2015.7305064
An Evaluation of Radio Frequency Induced Power Deposition with an Implant Model M. Kozlov, G. Schaefers IEEE CAMA 2015, DOI:10.1109/CAMA.2015.7428119
An Assessment of Radio Frequency Induced Heating of an Implant M. Kozlov, G. Schaefers IEEE COMCAS 2015, DOI:10.1109/COMCAS.2015.7360392
Numerical Analysis of Time-varied Radio Frequency Induced Heating on and near an Implant during Magnetic Resonance Imaging M. Kozlov, G. Schaefers IEEE COMCAS 2015, DOI:10.1109/COMCAS.2015.7360373
Analysis of power deposition and temperature rise due to presence of an implant inside a 1.5 T MRI RF coil M. Kozlov, G. Schaefers IEEE EMBC 2015, DOI:10.1109/EMBC.2015.7319709
MR safety investigation of RF heating of an generic wire-shaped device immersed to a human body simulating medium at 63.58 MHz (1.5 T MRI-equivalent) M. Abbasi, G. Schaefers, A. Douiri, D. Erni ISMRM 2015
Comprehensive analysis of temperature rise generated by a titanium rod inside 1.5T MRI RF whole body coil M. Kozlov, G. Schaefers ISMRM 2015
RF dipole coil with novel slotted shielding plate achieving an improved B1 distribution for 7 T MRI Z. Chen, M. Abbasi, K. Solbach, D. Erni, A. Rennings ISMRM 2015
Needle position estimation from subsampled k-space data for MRI-guided interventions S. Schmitt, M. Choli, H. M. Overhoff Medical Imaging 2015 – Image-Guided Procedures, Robotic Interventios and Modeling 2015
Raw data based needle tracking in MR-guided freehand interventions S. Schmitt, C. Sobotta, M. Choli, G. Schaefers, H. M. Overhoff Scientific Exhibit ECR 2015
MR-Sicherheit und Kompatibilitaet von Implantaten M. Choli 1. Greifswalder Ryck-Symposium 2014
MR safety of pace maker and neurostimulators, ISO/TS 10974 related testing issues M. Choli BMT – Biomedical Technology/Biomedical Engineering 2014
Artifact simulation and measurement of interventional needles in MR imaging M. Choli, S. Schmitt, K. Skopnik, G. Schaefers BMT – Biomedical Technology/Biomedical Engineering 2014
Phantom for testing of MRI image artefacts of interventional devices in MRI R. Bahadir, M. Choli, K. Skopnik, J. Watzlaw, G. Schaefers BMT – Biomedical Technology/Biomedical Engineering 2014
Comprehensive analysis of RF Test Lab System for MR Safety Testing of Medical Implants M. Kozlov, G. Schaefers IEEE APS 2014, DOI:10.1109/APS.2014.6904924
MRI Gradient Field-Induced Heating and its Frequency Dependency for Different Materials J. D. Sanchez, M. Abbasi, A. Douiri, M. Choli, W. Goertz, G. Schaefers ISMRM 2014
Comprehensive analysis of power deposition generated by a titanium rod inside different 1.5T whole body coils M. Kozlov, G. Schaefers ISMRM SMRT MR Safety Workshop Washington 2014
Evaluation of ASTM and racetrack phantom for safety test of medical implants in respect to ASTM F2182-11a and ISO/TS 10974 (technical specification) M. Abbasi, G. Schaefers, D. Erni ISMRM Workshop on Safety in MRI: Guidelines, Rationale, and Challenges 2014
Worst-case analysis of RF induced heating during MRI scanning in a generic multi-component orthopedic medical implant applying the design of experiment method (DoE) M. Abbasi, G. Schaefers, J. D. Sanchez, D. Erni Joint Annual Meeting ISMRM-ESMRMB 2014
Homogeneity of electric field in racetrack phantom for RF-heating test of large size medical implants M. Abbasi, G. Schaefers, D. Erni SMIT 2014